6202Z Deep Groove Ball Bearing 15X35X11mm

6202Z deep groove ball bearing 15X35X11mm

product information:

Internal diameter:15mm

External diameter:35mm

Width:11mm

Load Rating(Cor):3700 N

Load Rating(Cr):7450 N

Weight:0.045kg

Product features：

Deep groove geometry for high speeds

Single row for supporting radial loads

Steel cage evenly spaces balls for reduced friction, vibration and noise

Shield on one side for protection against contaminants

CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision

Product description：

Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip (Contact Suffix LLU). Or, non-contact with the inner ring is by labyrinth seal (Non-contact Suffix LLB) to provide positive sealing at all times.

The Application:

It is mainly used to bear radial load, also can absorb a certain amount of axial load. When bearing radial clearance increases, has the function of angular contact ball bearings can withstand axial load. Compared with the same size of other types of bearings, such bearing small friction coefficient, high limit speed. In high speed under the condition of unfavorable use thrust ball bearing can use these bearings carry axial load.

The 6200 series deep groove ball bearing models and sizes:

 

Sincerely welcome you to send enquiry to us!!!