Hybrid Ceramic Pillow Block Bearing SB206
Product Description
Product information:
Name:SB206 pillow block bearing
Brand:YWS or OEM
Weight:0.2kg
d:30mm
D:62mm
B:30mm
Old model:AS206
Number of row:single row
Feature:high speed
Product feature:
Pillow block bearings are preferred for applications where equipment and components are required to be simple, such as for agricultural machinery, transportation systems or construction machinery. It is mainly used to bear radial and axial combined loads mainly based on radial load. Generally, it is not suitable to bear axial load alone. Such bearings can be installed with inner ring (with full set of rollers and retainers) and outer ring. This type of bearing does not allow the shaft to be tilted relative to the housing, creating additional axial forces under radial load. The axial clearance of the bearing has a great relationship with the normal operation of the bearing. When the axial clearance is too small, the temperature rise is high; when the axial clearance is large, the bearing is easily damaged. Therefore, special attention should be paid to adjusting the axial clearance of the bearing during installation and operation. If necessary, pre-interference can be installed to increase the rigidity of the bearing.
Product advantages
1 Low frictional resistance, low power consumption, high mechanical efficiency, easy to start.
2, the size is standardized, interchangeable, easy to install and disassemble, easy to maintain.
3. Compact structure, light weight and smaller axial size.
4. High precision, high speed, low wear and long service life.
5, can bear radial and thrust combined load at the same time;
6, in a large load-speed range, unique design can obtain excellent performance;
7. Bearing performance is relatively insensitive to fluctuations in load, speed and operating speed.