How is the pillow block bearing repaired after it is worn?

As a manufacturer of bearings, YuKi group gives you some tips on pillow block bearing.

The product we produce, the bearing housing, is a common problem in the process of wear, and the bearing seat wear problem is more common. It can also be repaired, and the traditional repair method is the surfacing machine to repair, which will make the surface temperature of the parts reach high, and cause deformation or cracking of the parts, and the downtime will be prolonged. 

If some chemical materials are used for repair, the wear resistance of the product and the metal material will not be repellent, and the repaired position can achieve a comprehensive contact fit, thereby reducing the shock vibration of the device and effectively avoiding the possibility of wear.

In the process of repairing the bearing housing on site, avoid the repair method of the rackworker:

1. The surface treatment is clean, especially dirty materials and oil stains;

2. It is necessary to adjust the repair materials used reasonably;

3. in the application of materials, the material can be evenly applied to the repair of the bearing seat, to be full;

4. to thoroughly cure the material, but also for a short time to heat the surface material for rapid curing;

Under normal circumstances, after the bearing chamber is worn, the time required for repair is completed within 3-6 hours. The operation is relatively simple and very easy to learn. There is no special equipment and training, and the corresponding financial and material resources can be saved. Save cost and repair time.